Instrument Housing and Training WorkBench Manufacturer,Supplier and Exporter in China
Product Code : EL-LES-17922
1. Training bench – 1 Nos
2. Oscilloscope– 1 Nos
3. DC power supply– 1 Nos
4. Function Generator– 1 Nos
5.RF Generator– 1 Nos
6.Digital multimeter– 1 Nos
7. AC power supply: 1 Nos
8. Soldering station: 1 Nos
9. AC outlet – 1 Nos
10. Test leads holder– 1 Nos
1. Training bench
- Height: 815mm
- Width: 1570mm
- Depth: 900mm
- 4 adjustable stands or 4 wheels
2. Oscilloscope:
Technical Specification
- CRT: 6-inch rectangular screen with internal gratitude, 8x10div (1div = 1cm)
- Display mode: CH1. CH2. ADD, ALT, CHOP
- Deflection factor: 5mV/div to 5V/div ±3%. 1mV/div to 1V/div ± 5%(X5).10 steps
- Rise time: ≤17.2ns
- Max. Input voltage: 250V (DC+AC peak) ≤1KHz
- Input coupling: AC. DC. GND
- Polarity selection: + or - (CH2 only)
- Display mode: 1,10, X-Y
- Time Base: 0.2us/div to 0.2s/div,9 ranges
- Sweep magnification: X10
- Accuracy: ±3%
- Trigger mode: NORM, AUTO, TV-V, TV-H
- Trigger source: CH1.CH2. VERT. LINE. EXT
- Sensitivity and Frequency: 20Hz-30MHz(VERT)
- AUTO. NORM: 0.5div(INT), 0.5Vp-p(EXT)
- TV-V, TV-H: At least 1 div or 1 Vp-p
- Input impedance: 1MΩ
- X-Y Phase difference : ≤3°,DC-50kHz
- Calibration waveform: Frequency: 1kHz ±20%, voltage :0.5V ±10%
- Power supply: 220V/110V ± 10%; 50/60HZ
- Dimensions: Approx. 310(W) X 130(H) X 370(D)mm
- Weight: About 8.5KG
3. DC power supply
Technical specifications
- Output voltage: 0-30v
- Output current: 0- 5ARipple & Noise: CV 1mVrms, CC 3mArms
- Display Accuracy : (0.5% Rdg +2 digits)
- Power source: 220-240v AC, 50Hz
- Dimensions (WxHxD) :Min 130x 165x305 mm
- Weight: Min 6Kg
4. Function Generator:
Technical Specification:
- Frequency range: 0.3-3MHz
- Output waveform: Sine, Triangle, Square, positive or negative pulse wave of,
- Positive or negative ramp.
- Output Impedance: 50Ω±10
- Amplitude modulation: Not smaller than 20Vp-p(open)
- DC offset: 0~±10V continuous adjustable
- Symmetry Range: 80:10~10:80
- Rising Edge of square wave: 100ns or 50ns
- Sine Wave Characteristic
- Distortion: 10Hz-100KHz less than 1
- Frequency Response: 0.1Hz to 100KHz not larger than ± 0.5dB, 100KHz to
- 3MHz not larger than ± 1dB,100KHz to 6MHz not larger than ± 2dB, 100KHz to 10MHz not larger than ±3dB, 100KHz to 15MHz not larger than ± 3.5dB
- TTL output Level: TTL the low level of an impulse wave is not larger than 0.4v, high level is not smaller than 2.4v
- Rise time: Not larger than 30 ns
- Modulating frequency: 400Hz internal, 01MHz external
- Modulation Depth: 0-85%
- Deviation: 0-10%
- Modulating frequency: 400Hz internal, 01MHz external
- Distortion of modulation frequency: ≤1.5% (fc=500KHz fm=1kHz,10%)
- Power output (Model with W)
- Amplitude: Not smaller than 20Vp-p Power
- Sweep mode: Liner; logarithmic
- Sweep speed:10ms~5s
- Sweep ratio: ≥ 1000:1
- Output amplitude: 7Vp-p
- Output impedance: 600Ω
- VCF input
- Output voltage: -5V~0V ± 10%
- Max ratio of voltage control: 1000:1
- Input signal: DC-1KHz
Frequency Meter:
- Measuring range :1Hz-20MHz
- input impedance: Not smaller than 1MΩ / 20pF
- Sensitivity: 10mVrms
- Max input: 150V(AC+DC)(attenuator included)
- Input attenuation: 20db
- Measuring error: Not larger than 0.003% ± 1digit
- Power Supply: 220V/110V±10%, 50/60HZ
- Dimension: Approx.310X230X90mm
- Weight: About 4 kg
5. RF Generator
Technical Specification:
- Frequency range A:100KHz-300KHz/ B: 300KHz-1MHz/ C: 1MHz-3.2MHz/D: 3MHz-10MHz/E: 10MHz-35MHz/ F: 32MHz-150MHz
- Frequency range: 100KHz-150MHz (3rd harmonic wave up to 450MHz)
- Frequency accuracy: 13%
- Output waveform: RF/AM signal waveform
- Output impedance: 600 ohm
- Radio frequency output: Over 100mVrms output
- Level control: 1mV-100mV
- Internal modulation : 1Khz ± 2%>2Vrm outputExternal modulation: 50Hz-20KHz for any setting
- Normal operator temperature/ humidity: 10°C to 35°C/ with 85%RH
- Power supply: 220V / 110V +/-10%; 50/60Hz
6. Digital Multi Meter
Feature:
- Over voltage/current audible alarm
- High voltage warning
- Auto power off (can be disabled)
- Low power consumption
- Fast and accurate capacitance measurement
- 2m drop proof
Technical Specifications:
- DC voltage (V): 600mV/6000mV/60V/600V, ±(0.5%?3)
- AC voltage (V): 600V, ±(1.2%+3)
- DC current (A): 600uA/60mA/600mA/10A, ±(1%+2)
- AC DC current (A) : 10A
- Resistance (Ω): 600Ω/6000Ω/60kΩ/600kΩ/60MΩ, ±(0.8%+2)
- Capacitance (F): 9.999nF/99.99nF/999.9nF/9.999μF/99.99μF/999.9μF/9.999mF,±(4%+5)
- Display count: 6000
- Range selection: Manual
- Diode: yes
- Continuity buzzer: Yes
- NCV: Yes
- LCD backlight: yes
- Test probe holder: yes
- Data hold: yes
- Low battery indication: yes
- Overload indication: yes
- Power: 1.5V battery (R03) x 2
- Display: Min 56.8mm x 36.1mm
- Net weight: About 255g (with batteries)
- Dimension: Approx.155mm x 76.5mm x 49mm
7. AC Power supply:
- Input voltage: 220V AC ± 10%, 50 Hz
- Output voltage: 0~30V
- Output Current: 0-5 A DC
- Source Effect: CV ≤0.01% ± 3mV, CC ≤0.5% ± 3mA
- Load Effect: CV ≤0.05% ± 3mV, CC ≤0.05% ± 10mA
- Ripple & Noise: ≤ 5mVrms CC ≤ 20mA
- Display: Double 4 light LED display
- Protection: Current limit protection, short circuit protection, overload protection
- and heat protection
- Working Temperature : 0±400 C , RH <90%
- Voltage Display precision: LED ±1 % + 5 digit
- Dimension: Approx.24X13X15 cm
- Weight: Less than 2 kg
8. Soldering station:
Feature:
- Adjustable temperature control with lock/set screw
- Temperature range 392°-896°F (200°- 480°C)
- Maintains idle temperature within 1.8°F (1°C)
- Ceramic heating element and sensor insures rapid heat-up temperature (30
- seconds) and Lightning-fast thermal recovery
- Celsius or Fahrenheit temperature setting
- Temperature is adjusted by simply turning the dial
- Slender iron handles are insulated and ergonomic-designed for ease and comfort
- Accommodates large, medium, or small irons
- A wide selection of tips available for soldering SMD and through-hole connections
Technical Specification:
- Consumption: 60W
- Output Voltage: 24V AC
- Temperature : 200°C - 480°C (392°F - 896°F)
- Temperature Stability : ±1.0°C (1.8°F)
- Dimensions : Approx.120(W) x 93(H) x 170(D) mm
- Weight: About 2.9 lbs