Plastic Fibre System Manufacturer,Supplier and Exporter in China
Product Code : EL-LES-14174
SPECIFICATION
- The system (POI) should consist, at least, of the following, necessary components and Instruments, of appropriate technical data
- Fibers (specially treated plastic product)
- Electronic Controls (Modulator - Transmitter - Receiver - Demodulator - and Audio Amplifier with two Speakers)
- Desktop type KIT Demodulator
- The intended objective - educational purpose of the system should consist, at least, of the following processes
- stripping of the fiber (through a special, provided tool)
- assembly and polishing of the connector
- measurement of data transfer losses, at different lengths of the fiber (with the corresponding supplied / supplied system) and
- assembly - arrangement - realization, (setup), of a two-channel data transmission system, of low (preferably) frequency (with the use of the provided accompaniments to the debit system)
- LED Transmitter - LED Signal Modulator - Receiver Photodetector - Beam Separator
- data transfer in two wavelengths
- intersection frequency observation
- observation of disagreement
- Components and instruments (indicative), for the realization of the objective educational goal of the system to be:
- flat, calibrated rail, approximately 500mm long and 65mm wide
- LED transmitter regulator, with signal generator, adjustable frequency and receiver width (photodiode) with amplifier and demodulator
- Coupling POI type Y on carrier ≥40mm with spring mechanism
- Two special couplings (FSMA), on a 20mm carrier with a spring mechanism. One of the two with adjustment on the X, Y axes
- In-housing receiver system, with optical light beam modulation, wavelength controller and two photodetectors, on ≥65mm carrier with spring mechanism
- Three 1000μm POI cables (10m, 20m, 30m), with two connectors (FSMA) each
- a pair of stereo speakers
- set of tools for the preparation and assembly of FSMA connectors
- Cutter, specialist for cutting fiber optics
- Fiber optic stripper to remove the outer layer of the fiber
- Fiber optic polishing / polishing disc
- At least ten (10) fiber polishing membranes, 5μm
- At least ten (10) fiber polishing membranes, 0.3μm
- Flat fiber polishing plate
- Isopropanol
- FSMA metal plugs, reusable type: ≥10 pcs and fiber optic cable: ≥50m.
- Series of required BNC cables and 50Ω adapters (four pieces)
- The system, WHO, should be able to connect to the transmitter, and other signal sources, such as microphone, CD, etc., and for the measurements to use a 100MHz oscilloscope, which will accompany the system with the following specifications
- ≥ 2 Channels, ≥ 100 MHz Band, 2 Signals 1 X / 10X
- Liquid crystal display, type TFT, resolution 800x480px and 8x16 division
- Vertical Scan 2mV / div-10V / div, Horizontal Scan 2.5ns / div-50s / div, Rate
- sampling 1 GSa / s, at least.
- Mathematical operations: addition, subtraction, multiplication, division, fast
- Fourier transform
- Automatic measurements: ≥ 30 parameters
- USB Host & Device, Ethernet