CO2 incubator Manufacturer,Supplier and Exporter in China
Product Code : EL-LES-17634
-
Copper-made container or chamber Measured in cubic metres, the capacity is 150 liters (5.3 cubic feet).
-
O2 Concentration Range: Not Required between 1 and 21%, or between 5 and 90%.
-
Built-in water tank serves as the primary source of humidity
-
RS230 for the transmission of data
-
A concentration of carbon dioxide ranging from 0 to 20%;
-
Making use of LED lighting
-
Temperatures ranging from -2 degrees Celsius to 54 degrees Celsius are possible.
-
The dimensions (depth x width x height) of the inside are as follows: 20.9 inches by 18.5 inches by 23.9 inches; 158 pounds weight.
-
Voltage equal 220 v
-
The direct heat chamber is a specialized enclosure designed for the purpose of applying heat directly to a target object or material.
-
The chamber is constructed entirely of copper, ensuring a strong composition.
-
Additionally, it possesses a compact footprint, allowing for convenient stacking.
-
The door swing is of a standard configuration, specifically designed for left-hand operation.
-
The assembling process of the product is designed to be minimal and user-friendly, allowing for easy cleaning.
-
The interior chamber of the product is designed to have a smooth surface, and the corners are rounded.
-
The in-chamber fan facilitates the gentle distribution of conditioned and humidified air within the chamber.
-
In situ sensors and probes that are specifically engineered for accurate monitoring;
-
The selection of a carbon dioxide (CO2) sensor for extended and dependable functionality, or an infrared (IR) CO2 sensor for the purpose of monitoring in situations where humidity and temperature exhibit greater variability
-
The utilization of dual temperature probes equipped with excessive temperature protection.
-
The water reservoir is specifically engineered to be directly heated, with the primary objective of maintaining a consistent and elevated level of relative humidity.
-
This design feature serves the purpose of safeguarding against the dehydration of cultures.
-
The pan-less technology exhibits recovery rates that are up to five times faster compared to conventional water pans.
-
It has a length of 30.8 inches, a width of 25.1 inches, and a height of 24.1 inches.
-
The ContraCon 90°C moist heat disinfection cycle is a method utilized for the purpose of disinfection.
-
The utilisation of an on-demand cycle streamlines the process of cleaning and obviates the necessity of autoclaving components individually.
-
The operation is straightforward and may be easily executed by pressing a button, without the need to remove any sensors or other components.
-