Optical Fusion Splicer Standard Package With Fiber Cleaver And Fiber Jacket Remover Manufacturer,Supplier and Exporter in China

Product Code : EL-TLE-15484

SPECIFICATION

1. Optical Fiber Requirements
   1. Material : Silica Glass
   2. Fiber count / Profile types : Single / SMF (G.652), MMF (G.651), DSF (G.653), NZDSF (G.655), BIF (G.657)
   3. Fiber diameter : Cladding diameter (80 ~ 150 μm), Coating diameter (100 ~ 1,000 μm)
   4. Cleave length : 5 ~ 16mm with coating clamp
2. Standard Performance
   1. Splice loss (typical) : SMF (0.02dB), MMF (0.01dB), DSF (0.04dB), NZDSF (0.04dB)
   2. Return loss (typical) : 60dB or greater
   3. Splice time (typical) : 6sec (SM G652 Quick Mode), 8sec (Auto Mode)
   4. Heating time (typical) : 15sec (FPS-61-2.6 sleeve, S60mm 0.25)
   5. Splice Heat cycles per battery full charge : Approx. 300 (BU-16)
   6. Fiber view magnification : 2 CMOS cameras observation, 350X (zoom : 700X) for X or Y single axis view, Max. 350 for both X Y dual axis view.
   7. Proof test : 1.96 ~ 2.09N h. Applicable protection sleeve : 60mm, 40mm Nano sleeves
3. Programs
   1. Splice programs : Max. 300, 40 are pre-optimised, 260 editable by user
   2. Heating programs : Max.100, 23 are pre-optimised, 77 editable by user
4. Functions
   1. Splice image capture / splice data storage : 200 images / 10,000 splice data (internal memory only) 50,200/20,000 (with 16GB SD card)
   2. Universal clamps : Provided, 250 μm, 900 μm tight loose buffer fiber
   3. Reversible coating clamps : Provided
   4. Onboard user training video : Provided
   5. Automatic fiber identification : SMF / MMF / Other
   6. Automatic arc calibration : Automatically compensates for environmental condition changes
   7. Display of remaining Splice Heat cycles : Provided (Battery mode)
5. Size / Weight
   1. Size : 128 (W) x 154 (D) x 130 (H) mm (without anti-shock rubber)
   2. Weight : 1.7kg (without battery) / 2.0kg (with Battery BU-16)
   3. Monitor : 5.0” touch screen color LCD display
6. Terminals
   1. DC output : DC 12V (for JR-6)
   2. USB port : USB 2.0 (mini-B type)
   3. Storage media : SD /SDHC memory card MAX32GB
7. Operating Condition Altitude : 0 ~ 6,000m, Temperature : -10 ~ +50°C, Humidity : 0 ~ 95% (non- condensing), wind velocity : up to 15m/sec
8. Storage condition Temperature :-40 ~ +80°C, Humidity : 0 ~ 95% (non-condensing), Battery : -20 ~ +30°C (long term)
9. Electrode life - 6,000 arc discharges
10. Software updates: Internet
11. Data management: can be stored, edited and analyzed by dedicated PC software

ACCESSORIES

1. Accessories for Splicer
   1. Fiber holder (FHS-025, FHS-09, FHS-025/LB5, FHD-1,1SM-ST, FHC-3)
   2. Batter pack (BU-16(Li-ion 6,400mAh))
   3. Battery charger (BC-16)
   4. Car battery cable (PCV-16(Vehicle 12V outlet))
   5. V-groove cleaning brush (VGT-2) f. Electrode (ER-10)
2. Accessories
   1. Handheld fiber cleaver (FC-8R-FC (Auto blade rotation + cleave counter), FC-8R-F (Auto blade rotation))
   2. Fiber cleaver (FC-6S-C (Table-top high precision cleaver), FC-6RS-C (Automatic blade rotation cleaver))
   3. Jacket remover (JR-M03 (for single fiber))
   4. Loose tube cleaver (LTC-01)
   5. Automatic Alcohol dispenser bottle with twist lock (GR-3)
   6. Fiber protection sleeve (FPS-1, FPS-40, FPS-61-2.6), 60mm length
   7. 2x G.652D Bare Fiber 2km/drum.
   8. 1x KIM Wipes Ex- Tissue
   9. 1x 2-Propanol, Reagent Grade (99% ALCOHOL), 4L

POWER REQUIREMENT

1. Power supply
   1. AC input : AC 100 ~ 240V, 50/60Hz (ADC-16)
   2. DC input : DC 10 ~ 15V
   3. Battery pack : Li-ion 10.8V, 6,400mAh (BU-16)
2. Others All required cables such as AC (cord and adapter) and USB needed to make the equipment fully operational must be supplied.